Contact US

(866) 924-AQUA or (866) 924-2782

The Largest Selection of Underwater Boat Lighting - All Made in the USA!

 

 

Aqua Lights BoroTrans Lens Technology Ensures Maximum Clarity to Produce Optimum Illumination

 
 
Infinite Menus, Copyright 2006, OpenCube Inc. All Rights Reserved.  
 

 

 

Welcome to Aqua Lights - Your Premium Underwater Bronze Lighting Source For Your Boat!

 

Question: Where are your lights manufactured?

Answer: At our world headquarters located in Buford, Georgia, USA All of our lights are manufactured in America. Feel free to take a virtual tour of our manufacturing facility by clicking here.

 

Question: Do you have a light that shuts off automatically if my battery voltage is low?
Answer: Yes, our 50 watt xenon (both 12 & 24 volts)

 

Question: I bought my lights from a different manufacturer who went out of business and they are not working; do you have replacement parts for them?
Answer: In many cases the answer is yes. In most cases Aqua Lights even has the ability to repair other manufacturers lights for you or upgrade just the lighting element if the housings are in good shape.

Question: What do I do if I don't have access to the back of my transom?
Answer: We manufacture three lights that can be mounted on the transom and fully   submerged  without drilling a hole through the hull. They are the AL175MH and the AL75H .

Question: Can the  lights be serviced from within the vessel?
Answer: Yes, the bulbs and wiring can be serviced and/or changed from inside the boat on all thru hull models.

Question: Is the light housing water-tight?
Answer: Yes, our entire housing is water-tight which means the entire fixture could go underwater and not leak.

Question: Will your lights corrode?
Answer: Our lights are completely made out of aluminum, stainless steel or naval bronze. They're not made from dissimilar metals which is a major factor in corrosion.

Question: How can I test the lights when the boat isn't in the water?
Answer: You can test the lights (up to 5 minutes) out of water.

Question: What size hole do I have to cut for the lights in the hull?
Answer: A hole about 2 1/2 inches for small lights and 4 1/2 inches for large lights. AL75H & AL50X are small lights while the AL175MH is our large light.

Question: How far below the Waterline do the lights need to be installed?
Answer: Anywhere from 6 inches to 24 inches - - the deeper the better.

Question: Where is the best place to install lights on my boat?
Answer: The transom is the usual spot for fish viewing, however, some mount the lights straight down through the hull for fishing or diving.

Question: Will Aqua Lights Underwater Lights help me catch more fish?
Answer: Yes, fish are attracted to light. We have personal experience catching fish at night where we normally didn't catch any.

 

 

   

TOP

 

Get Adobe Reader  Get Adobe Flash Player 

Aqua Lights is a proud member of

Site Design by DOD Media Group